LC Series CNC Router: The New Generation
Precision Ballscrew Drive Technology & 12HP Automatic Tool Changer for Industrial Production
High-Accuracy Industrial CNC Router Built for Heavy Workloads
Originally introduced in 2001, the Techno LC Series established an industry standard for combining high accuracy with structural stability at a competitive investment level. The New Generation LC Series builds upon over two decades of factory engineering experience, integrating all-steel frame construction, digital AC servo drives, and ball screw motion technology across X, Y, and Z axes for uncompromising tolerances.
Heavy Steel Construction
Proven US Design, Global Performance Standards
Engineered for cabinet makers, architectural millwork fabricators, sign creators, and plastic machinists, the LC Series handles continuous multi-shift production. Weighing over 5,500 lbs (2,500 kg), the stress-relieved steel chassis eliminates chatter and operational vibration, preserving edge quality and extending tool life.
- Full Ballscrew Transmission: Zero-backlash precision on X, Y, and Z axes for smooth vector motion.
- 12 HP Electrospindle: High-frequency automatic tool changer (ATC) operating up to 24,000 RPM.
- 4-Zone Vacuum Hold-Down: Multi-zone phenolic table with T-slots for mechanical or vacuum clamping.
- Pop-Up Registration Pins: 5 pneumatic alignment pins for quick, repeatable sheet origin setup.
LC Series Machine Specifications & Configurations
Configured for international procurement standards with custom voltage setups available for global distribution.
| Specification Feature | LC 4' x 4' Model | LC 4' x 8' Model | LC 5' x 10' Model |
|---|---|---|---|
| Working Process Area (X, Y) | 48" x 48" (1220 x 1220 mm) | 48" x 96" (1220 x 2440 mm) | 60" x 120" (1525 x 3050 mm) |
| Z-Axis Clearance & Travel | 12-inch (305 mm) Gantry Clearance / 10-inch Travel | 12-inch (305 mm) Gantry Clearance / 10-inch Travel | 12-inch (305 mm) Gantry Clearance / 10-inch Travel |
| Drive Mechanism | Ballscrew Drives on X, Y, Z Axes | Ballscrew Drives on X, Y, Z Axes | Ballscrew Drives on X, Y, Z Axes |
| Spindle Rating | 12 HP HSD ISO-30 / ER32 Air-Cooled ATC Spindle (6,000 – 24,000 RPM) | 12 HP HSD ISO-30 / ER32 Air-Cooled ATC Spindle (6,000 – 24,000 RPM) | 12 HP HSD ISO-30 / ER32 Air-Cooled ATC Spindle (6,000 – 24,000 RPM) |
| Motor & Drive Systems | Digital Brushless AC Servo Motors & Drivers | Digital Brushless AC Servo Motors & Drivers | Digital Brushless AC Servo Motors & Drivers |
| Tool Changer Rack | 8-Position Automatic Rear Tool Rack | 8-Position Automatic Rear Tool Rack | 8-Position Automatic Rear Tool Rack |
| Table Type | Vacuum Grid Phenolic Bed with Aluminum T-Slots | 4-Zone Vacuum Grid Phenolic Bed with T-Slots | 4-Zone Vacuum Grid Phenolic Bed with T-Slots |
| Material Alignment | 5 Pneumatic Pop-Up Pins | 5 Pneumatic Pop-Up Pins | 5 Pneumatic Pop-Up Pins |
| Approximate Weight | 3,800 lbs (1,720 kg) | 5,200 lbs (2,350 kg) | 6,100 lbs (2,760 kg) |
Built for Production Rigidity & Operation Speed
Stress-Relieved Steel Chassis
Fabricated from heavy tubular steel walls, welded and heat-treated to remove internal metal stress. Machined on precision multi-axis horizontal mills to ensure structural alignment across decades of use.
12 HP Automatic Tool Changer
High-frequency electrospindle with pneumatic tool retention. Supports ISO-30 tool holders and ER32 collets, allowing seamless routing, drilling, pocketing, and profiling without operator intervention.
Ground Linear Guide Rails
Hardened square linear guide rails with recirculating ball bearings deliver high load capacities in all directions, guaranteeing high positioning accuracy even under maximum cutting force.
8-Position Tool Station
Positioned along the rear section of the frame, the tool rack stays protected from dust while providing fast tool changeover cycles to minimize idle machine time during complex nested programs.
Cyclonic Dust Extraction Shroud
Equipped with a pneumatic vacuum hood with a 6-inch (150 mm) extraction outlet. Creates high static pressure around the cutting zone to pull debris instantly into dust collection systems.
Handheld DSP Control Unit
Industrial handheld DSP pendant with step-jog control, speed/feed override, tool length offset macro, and program preview capabilities. Easy for machine operators to learn in hours.
Versatile Material Processing for Manufacturing Overseas
The LC Series ball screw architecture enables precise machining across hard woods, soft woods, engineering plastics, non-ferrous metals, and composite panel materials.
Cabinetry & Millwork
Plywood, MDF, Melamine, Veneer
Plastics & Acrylics
HDPE, Acrylic, PVC, Polycarbonate
Non-Ferrous Metals
6061 Aluminum, Brass, Copper
Signage & Composites
ACM, HDU Board, Solid SurfaceCommon Questions from International Importers & Buying Agents
The LC Series utilizes precision ground ballscrew drives on all three axes (X, Y, and Z). Ballscrew mechanisms eliminate rotational backlash, delivering superior positional accuracy, smoother surface finishes, and tight tolerances required for delicate woodworking, plastic machining, and non-ferrous metal carving.
The LC Series is manufactured in three standard industrial sizes: 4' x 4' (1220 x 1220 mm), 4' x 8' (1220 x 2440 mm), and 5' x 10' (1525 x 3050 mm), featuring a generous 12-inch gantry clearance to accommodate thick stock and 4th-axis rotary attachments.
Yes. Techno CNC builds machines for overseas buyers with custom transformer options supporting 220V, 380V, 415V, or 480V 3-phase power grids at 50Hz or 60Hz.
The LC Series features an open-architecture controller that seamlessly accepts G-code output from standard CAD/CAM software including Vectric VCarve Pro / Aspire, Mastercam, Fusion 360, Type3, Alphacam, and EnRoute.
Request Custom Machine Specifications & Global Shipping Quote
Connect directly with our application engineers to determine the ideal spindle power, vacuum configuration, and freight logistics for your manufacturing facility.
Send an Inquiry